Add Server Clerk Android

Add Server/Add Clerk- Android

Add Server/Add Clerk- Android


In the File
  1. Industry Tab
  2. Industry Features Subsection
  3. Clerk Server ID Prompt - Enabled

In the Terminal
  1. Tap Func
  2. Settings
  3. Merchant Settings
  4. Enable Clerk / Server Prompted ID - Yes
  5. Back out to Transaction Amount 0.00 screen
  6. Tap Func
  7. Operator
  8. Add Operator - Name /Server

    • Related Articles

    • How to Reset the Android Settings Password

      If an A920 Android terminal has had the Settings password changed and the client doesn't remember it, this can be reset. The entity that programmed (built the file) the terminal in PAXSTORE can push a firmware update. Once the firmware is updated, ...

    • Reboots every 24 hours (Security Checks) Traditional & Android Terminals

      The 24-hour reboot is a PCI requirement and cannot be disabled. All Traditional terminals reboot 24 hours from when they are powered on. If you would like to change the time they reboot, simply unplug the terminal and then plug it back in at the time ...

    • Must Register Error

      Occurs when the terminal is not registered to PAXSTORE Validate the terminal Set-Up in PAXSTORE and that the terminal is Active Check the terminal configurations Menu - System Settings - Configuration Server URL and Server Port should be ...

    • A80 connect to Q25

      The connectivity of the Q25 to the PAX A80 depends on the payment application on the A80 and making sure that the setup on the A80 is configured properly. Pinpad type- External External Card Reader- Auto The application on the A80 must support EXDEV. ...

    • Uploading Logs

      How to upload BroadPOS Log Instructions for Android: Open BroadPOS Settings Menu. Scroll to the bottom and select "About BroadPOS". Tap "Log Upload". Tap "Agree and Upload". Wait for the upload to complete. Share SN and datetime of relevant logs with ...