Vantiv/WorldPay

Vantiv (Worldpay) File Build

Vantiv/WorldPay File Build

Vantiv is the application for World Pay.  The VAR for a Vantiv app is very detailed.  For example, it will tell you if the Internal Contactless module should be turned on or not.

As for the Host Parameters, on the Merchant Parameters, there are only three blocks you have to enter.  

BroadPOS Parameter Name
Vantiv Var Sheet Name
Number of Digits
Bank ID
Bank ID
4
Merchant ID
Merchant #
12
Terminal ID
Terminal #
3  (If less than 3 digits, pad with leading zeros)
Network Routing Code
Network Routing Code
6  (Alpha-numeric, found at the bottom of VAR. If not found, they must contact Vantiv/WorldPay)


Please note: Set P2PE mode to “Disabled” unless it has been set up on the WorldPay side for that.
If you are getting an error trying to run a transaction, check with Vantiv/WorldPay to confirm the values.  They may have been changed without the ISO being informed.         

    • Related Articles

    • Gift Card Processors/Other Processor Names

      STS/ Smart Transaction Systems = Swipe It Valutec - for TSYS Valuelink - for FiServ; on current FDRCNV/Rapid Connect apps no bundled application is needed. The ValuLink MID is entered in the Alt MID of the file build and this activates the gift card ...

    • Invalid Terminal ID

      There is no file for the terminal in Paxstore. Make sure there is a file built for the terminal in PAXSTORE Verify that the serial number is correct in the file build Then verify the terminal is pointing to the correct TMS for a download Menu > ...

    • Failure VM

      This is a host response from TSYS meaning they is not accepting the information being sent to them from the terminal. If the customer is on an application more than 1-year-old, update the application version. If updating the application does not ...

    • Terminal Capture and Host Capture

      Terminal Capture: All transactions are stored in the terminal and must be sent to the Host for completion. - The merchant is responsible for closing the batch at the end of the night or making sure auto-batch is properly set up in the file build - ...

    • SP20 V4

      The new SP20 V4 model with a contactless reader. All new applications will require an SP20 V4 Pinpad if the merchant wants to use an external Pinpad. Be sure to edit the settings on the file build to reflect the features for this Pinpad. Go to MISC ...