Check Terminal Configuration

Check Terminal Configuration

Use these steps to determine if a traditional terminal is pointing to BroadPOS or PAXSTORE.
  1. Menu
  2. System Settings
  3. App Management 
  4. Configuration
  5. Sever URL should display t.paxstore.us
  6. Server Port should display 9080
If the terminal is not pointing to the correct location for downloads walk the do a firmware update for PaxStore or enter the correct URL and port number manually. 



    • Related Articles

    • Invalid Terminal ID

      There is no file for the terminal in Paxstore. Make sure there is a file built for the terminal in PAXSTORE Verify that the serial number is correct in the file build Then verify the terminal is pointing to the correct TMS for a download Menu > ...

    • Module Check

      How to Perform a Module Check Power Cycle the terminal and upon reboot hold the function or menu key until you see self test on the screen, depending on the device you may need to press Menu once you see the PCI screen 1. Hit the arrow down until you ...

    • PAXSTORE Traditional Terminal TID Download

      If you are trying to download a file for your traditional terminal and it is asking for a TID this means you need to enter the TID # listed for this merchant's terminal in PAXSTORE in order to download the file that is waiting. Whoever builds the ...

    • PED Tampered/ Terminal Be Attacked/ PCI Ped 4

      Ped Tampered /Terminal Be Attacked: The terminal has detected an insecurity with the hardware and has locked itself for security purposes. This can happen if the terminal was dropped or actually tampered with. This error message will also appear if ...

    • Check LAN Cable

      This error message means that the machine cannot recognize the ethernet cable connected to it. To trouble shoot the issue, please proceed with the following: Have the caller verify that the Ethernet cable is inserted properly into the LAN port of the ...