EBT

EBT

EBT: Check if EBT and its features are enabled on the EDC tab. 

  • Tsys requires the FCS ID,  Merchant ABA, and Merchant Settlement (FIID) to process EBT. If this information is not on the File EBT transactions will not work.
  • Make sure customer has verified their FCS ID has been activated by the State. 
  • First Data requires the Merchant FNS Number to process EBT.
  • Debit will need to be enabled on the terminal because EBT processes the same as debit.
  • Terminal must be encrypted for debit to process EBT

EBT is only available on Retail Applications. 


    • Related Articles

    • A920 Not Processing Debit or EBT

      A920 Not Processing Debit or EBT If Debit or EBT options are not available on the A920 and the parameters are correct check if the terminal is in "NPM". If NPM is on the screen the terminal is in "No Paper Mode." It will not process Debit or EBT ...

    • Serv Not Allowed Error

      Serv Not Allowed Error: Host does not allow this type of transaction. Check the application version and parameters to verify the setup. Make sure the correct industry type is selected.  For instance, running EBT on a Restaurant application will ...

    • Injection Keys/Encryption

      Injection Keys/Encryption If you are experiencing issues with your terminal’s encryption: Resellers/ISO/ISV: If you do not have the ability to provide terminals with Key Injections you must reach out to the Distributor. · The PIN Debit key is always ...

    • Warning App Exception

      This means a Firmware Update is needed on the terminal. The terminal will typically display this error message twice. The first time it displays the Merchant should Close their batch and contact the ISO or PAX immediately to process an update. The ...

    • General Information for Traditional Terminals

      S80 Encryption with PIN pad. If you use an S80 or A80 with a PIN pad (SP20v4 or SP30s) both of them must be encrypted. SP20v4 PIN Pad with an S80 terminal and getting errors. This might happen for several reasons, including: Not setting the PIN Pad ...