Handshake Error

Handshake Error

Handshake Error:  This occurs during a Firmware Update

The terminal is not connecting to PAXSTORE or the firmware server. If this happens during a Firmware update make sure you are using the correct Port #, IP Address, and TID.

Also, verify the port number being used is not blocked by the network.

You can perform a firmware update using the guide here

    • Related Articles

    • Comm Error/Communication Error

      Comm Error This error occurs when trying to connect a Semi-Integrated terminal (SP30s, S300 etc.) to a POS or after processing a transaction. The POS can be the merchant's computer system or a PAX S80. The error will appear on the PAX terminal and it ...

    • Send Error

      This is a Host response. this error appears when trying to close the batch. Contact the host to determine what is wrong with batch or if there are any corrupted transactions in the batch. The host will be able to inform you why they can not accept ...

    • Invalid Track Error

      The error message listed above means that the information on the Magnetic Stripe cannot be read by the terminal. The Mag Reader could be dirty, or the card is dirty. You can clean the Mag reader by taking a paper towel and running it though the mag ...

    • PIN Xlate Error

      This Error occurs when there is an issue with the encryption on the terminal. The ISO (reseller) should contact their distributor for encryption. Some PASTORE accounts have RKI (Remote Key Injection) enabled thus they can push the encryption key to ...

    • Auto Detect Error - PIN pad

      Auto-Detect Errors occur when a PIN Pad such as an SP20v4 or SP30s mono cable connecting to a terminal like an S80/A80. To resolve the issue, make sure that the PIN Pad Type is set to External and the Contactless Module/External Card Reader is on ...