HTTP Host Error

HTTP Host Error

HTTP Host Error:

  1. This is a batch error from the host.  It indicates that there is an issue with the batch URL.  If the customer has never had issues batching, you can redirect the caller to the host to determine if they are experiencing any issues with the batch URL.
  2. If the caller has never been able to batch, have the caller verify their ISP (Internet Service Provider) is not blocking the site.  Also, advise they can add the URL as an exception to their network which will allow the terminal to send data to the host.
  3. you can find the URL on the Host tab of payment applications found in the Paxstore.


  • HTTP Error
    • Please Disabled POS Auto Register
      • Communication Tab > POS System Feature (Ethernet Only) > Terminal Register > POS Auto Register > Disabled

    • Related Articles

    • HTTP Get

      This occurs when you attempt a Host Register. The ISP firewall may be blocking the Primary Auth URLs. If the terminal is connected to a POS, make sure this protocol type is enabled in the Communications tab under Communication between ECR/POS. Change ...
    • Comm Error/Communication Error

      Comm Error This error occurs when trying to connect a Semi-Integrated terminal (SP30s, S300 etc.) to a POS or after processing a transaction. The POS can be the merchant's computer system or a PAX S80. The error will appear on the PAX terminal and it ...
    • Send Error

      Host response. This error appears when batching. Contact the host to determine what is wrong with batch or if there are any bad transactions in the batch. The host will be able to inform you why they can not accept the batch information. 
    • Terminal Capture and Host Capture

      Terminal Capture: All transactions are stored in the terminal and must be sent to the Host for completion. Host Capture: All transactions are sent to the Host for processing. The Host controls and closes the batch at set times. No batching is ...
    • Handshake Error

      Handshake Error: This occurs during a Firmware Update The terminal is not connecting to PAXSTORE or the firmware server. If this happens during a Firmware update make sure you are using the correct Port #, IP Address, and TID. Also, verify the port ...