No Program

No Program

If you have a PAX terminal that displays ‘NO PROGRAM’ you will need to perform a firmware update. 
Contact Tech Support at (877) 859-0099




    • Related Articles

    • E-Series QRG E500, E600, E700, E800

      Please see the attachment for the E-Series QRG. This Document can be shared with resellers.
    • S920L: Connect Issue/Radio Init/ Wifi Init

      S920 Workaround is Attached if needed Use the Back Menu to connect to your SIM Card or Wifi. The preferred SIM Card provider is T-Mobile. We can not guarantee the service with any other provider. Access the Back Menu (OS Menu) Turn off the terminal ...
    • PED Tampered/ Terminal Be Attacked/ PCI Ped 4

      Ped Tampered /Terminal Be Attacked: The terminal has detected an insecurity with the hardware and has locked itself for security purposes. This can happen if the terminal was dropped or actually tampered with. This error message will also appear if ...
    • How to Reset the Android Settings Password

      If an A920 Android terminal has had the Settings password changed and the client doesn't remember it, this can be reset in the terminal. The entity that programmed the terminal in PAXSTORE can push a firmware update. Once the firmware is updated, the ...
    • PIN Pads and Peripherals

      Running an SP20 PIN Pad & getting errors: If using this Pin Pad with an S80, S500 or A80 terminal errors may occur got one of these reasons:  PIN Pad type in the BroadPOS or BroadPOS Marketplace needs to be set to “External” or “Auto” ** The PIN pad ...