No TMS Terminal Not Bind

No TMS/ Bind Error

NO TMS/Bind Error: If the customer is using PAXSTORE be sure the terminal is ACTIVE in PAXSTORE .

If the customer is using a traditional terminal make sure it is pointing to t.paxstore.us with the port 9080, and that the terminal is active. 
  1. Menu
  2. System Settings 
  3. App Management
  4. Configuration
  5. Server URL is t.paxstore.us
  6. Server Port is 9080
  7. App management
  8. Activate


As a final step if you still can not activate the terminal we recommend doing a Firmware Update using the PAXSTORE NextGen TID that correlates with the model of the terminal to prevent the customer from keying in the wrong information.



    • Related Articles

    • Comm Error/Communication Error

      Comm Error This error occurs when trying to connect a Semi-Integrated terminal (SP30s, S300 etc.) to a POS or after processing a transaction. The POS can be the merchant's computer system or a PAX S80. The error will appear on the PAX terminal and it ...

    • Send Error

      Host response. This error appears when batching. Contact the host to determine what is wrong with batch or if there are any bad transactions in the batch. The host will be able to inform you why they can not accept the batch information. 

    • Handshake Error

      Handshake Error: This occurs during a Firmware Update The terminal is not connecting to PAXSTORE or the firmware server. If this happens during a Firmware update make sure you are using the correct Port #, IP Address, and TID. Also, verify the port ...

    • Invalid Track Error

      The error message listed above means that the information on the Magnetic Stripe cannot be read by the terminal. The Mag Reader could be dirty, or the card is dirty. You can clean the Mag reader by taking a paper towel and running it though the mag ...

    • PIN Xlate Error

      PIN Xlate This error occurs when there is an issue with the terminals' encryption. The reseller should contact their distributor in reference to encryption.