S300: Screen and Keypad
The figure below shows an S300 terminal screen and keypad.
1. Power cycle terminal (turn terminal off and back on again).
Related Articles
Terminal Locked
Terminal Locked Terminal Locked (S-Class terminal): If this displays on the Customers' terminal they have entered the incorrect terminal password too many times and the terminal is now locked. To unlock the terminal turn it off then turn it back on. ...Terminal Capture and Host Capture
Terminal Capture: All transactions are stored in the terminal and must be sent to the Host for completion. - The merchant is responsible for closing the batch at the end of the night or making sure auto-batch is properly set up in the file build - ...How to clean a PAX Terminal
Purpose: This document will demonstrate the necessary steps to take in keeping your PAX terminal sanitized, with the purpose of minimizing the spread of bacteria and other germs. Tools Needed: 60% or higher Alcohol-based Hand Sanitizer Card Reader ...Module Check
How to Perform a Module Check Power Cycle the terminal and upon reboot hold the function or menu key until you see self test on the screen, depending on the device you may need to press Menu once you see the PCI screen 1. Hit the arrow down until you ...PAXSTORE Traditional Terminal TID Download
If you are trying to download a file for your traditional terminal and it is asking for a TID this means you need to enter the TID # listed for this merchant's terminal in PAXSTORE in order to download the file that is waiting. Whoever builds the ...