Buzzer Sound

S80: Disable/Enable Buzzer Sound


On the Terminal

There must be an application downloaded to the terminal to change the buzzer sound on the terminal. 
  1. Press Menu
  2. Select Option 3-Operation settings.
  3. Enter Password for S80 Default MM-DD-YYYY
  4. Select Option 2-Buzzer Setup
  5. Select Option 1-Buzzer Setup
  6. Select Option 1-Buzzer Off

In PAXSTORE

  1. Search for the Serial Number
  2. Reconfigure the parameters
  3. Go to the MISC Tab
  4. Buzzer Settings Subsection
  5. Buzzer Sound
  6. Disable/Enable

    • Related Articles

    • A80 Sound and Notifications

      This setting can only be accessed from the android settings and NOT within the app. You will not be able to adjust the volume while the terminal is in Do Not Disturb (DND). Go to the Android Settings "Sound & Notification" (the media volume and the ...

    • Enable Split Tender

      Split Tender Using 2 or more different forms of payment in a single transaction. To use 2 cards the merchant MUST use an actual POS System to split the transaction. The steps below can be used to enable partial authorization/approval. If using an S80 ...

    • Corporate Card Support/Commercial Card Support

      This is a feature that can be enabled if the merchant wants to accept commercial cards at their location. The feature can only be changed from the file. To enable this feature: Go to Industry Tab in the file Go to the Subsection Host Features Enable ...

    • Offline Transactions/ Store & Forward

      Transactions are stored in the terminal and do not reach the Host until there is a working connection (Ethernet/Dial). There is a risk associated with Offline transactions because it processes payments without the host verifying money is available in ...

    • General Information for Traditional Terminals

      S80 Encryption with PIN pad. If you use an S80 or A80 with a PIN pad (SP20v4 or SP30s) both of them must be encrypted. SP20v4 PIN Pad with an S80 terminal and getting errors. This might happen for several reasons, including: Not setting the PIN Pad ...