Terminal Transaction Limit
All PAX terminals are defaulted to hold 1500 transactions. Once the transaction limit has been reached you can no longer process transactions.
- Be sure to Batch all transactions daily
- If the terminal is being batched successfully and you receive transaction limit error:
- Confirm with the Processor if they have received the batches. If they have received the most recent batch you can delete the database on the terminal.
- If the batch is set to Host Close on the Host and Terminal Close on the device, it won't clear the database. Confirm the settings on the host and change to "auto clear database" on the terminal.
Related Articles
Terminal Capture and Host Capture
Terminal Capture: All transactions are stored in the terminal and must be sent to the Host for completion. Host Capture: All transactions are sent to the Host for processing. The Host controls and closes the batch at set times. No batching is ...
Store-and-Forward Guide
Store & Forward Guide General Overview: What is Store & Forward? Store & Forward is a system that allows a merchant to still process transactions even when the terminal is unable to communicate with the Processor. The transactions are stored locally ...
Voiding a Transaction/ REV Outside WIN Error
This means the merchant tried to process a void outside of the timeframe allowed by the Host/Processor. Merchant will need to process a full return to refund the customer. Merchants cannot process a void after they have batched the transactions from ...
Delete a Transaction
There are incidences when a single transaction has corrupt data and it prevents you from closing your Batch. To get around this you will need to verify with the Host which transaction has the issue. You will need to capture the last 4 of the card ...
Invalid Transaction Type
This means the merchant is attempting to run a transaction that is not allowed by the Host (Processor). If you believe this to be an error check the parameters on your file to ensure it is set up correctly and contact the Host to validate everything ...